How the Auto Wire Stripper works

How the Auto Wire Stripper works

Ningbo Yongrong Technology Co., Ltd. provides you with high-quality Auto Wire Stripper products.
1. Defined use: Automatic wire stripper is one of the commonly used tools for electrician inside wire, electric motor repair and instrumentation electrician. It is specially used by electricians to strip the surface insulation layer of the wire head.

2. Principle and method of use: As shown in the figure, the schematic diagram of the mechanism of the wire stripper is shown. When the handle of the wire stripper is grasped to make it work, the spring in the figure is first compressed, so that the tightening mechanism tightens the wire. At this time, the shearing mechanism will not move due to the action of the torsion spring 1 . When the tightening mechanism fully clamps the electric wire, the acting force on the torsion spring 1 gradually becomes approximately so that the torsion spring 1 begins to deform, so that the shearing mechanism starts to work. At this time, the force on the torsion spring 2 is not enough to separate the clamping mechanism from the shearing mechanism. The shearing mechanism completely cuts the wire sheath and the shearing mechanism is clamped. At this time, the acting force on the torsion spring 2 increases. When the acting force on the torsion spring 2 reaches a certain level, the torsion spring 2 begins to deform, and the clamping mechanism and the shearing mechanism are separated, so that the cut insulation of the wire is separated from the wire. , so as to achieve the purpose of stripping.